Drilling Through a Finished Wall

There are times when clients require drilling through a finished wall.

In situations like that, slurry needs to be eliminated.

As can be seen from the images below, there was no slurry on either the finish or exposed concrete wall.

Drilling Through a Finished Wall

For more information on our concrete drilling services, click here.

Core drilling techniques are used when tradespeople require precise, circular holes drilled.

Any hole, from 12mm to 500mm diameter, can be achieved to make openings for plumbing, electrical, telecommunications

Stitch drilling is a process where we drill a series of overlapping holes in order to make openings.

Man Hole

With Auckland’s ever increasing infrastructure demands, service access is something that’s often needed after the fact. Man hole covers are a prime example of this kind of aftermarket demand.

See below for an example of how Sharp Concrete Cutters and Drillers core drilling service can be applied to Auckland’s ever increasing infrastructure demand.

Call Sharp Concrete Cutters and Drillers today on tollfree 0800 232 816 to discuss your aftermarket concrete drilling requirements.

Concrete Drilling

Core drilling techniques are used when tradespeople require precise, circular holes drilled.

Any hole, from 12mm to 500mm diameter, can be achieved to make openings for plumbing, electrical, telecommunications.

Stitch drilling is a process where we drill a series of overlapping holes in order to make openings.

Lift Shaft – Ring Saw

Lift Shaft – Ring Saw: This expansion to existing lift shaft was achieved using a ring saw.

Lift Shaft – Ring Saw

Using a petrol powered ring saw has a range of applications.

Typically, a ring saw can cut deeper than a hand saw which allows for cuts to be made in thicker panels and slabs.

This piece of equipment can also be used to cut through thick concrete pipes.

Do you have an indoor project? Do you want to mitigate carbon monoxide emissions? Check out our hydraulic cutting service.

Call Sharp Concrete Cutters and Drillers Ltd today to discuss how we can help you achieve your project goals. Freephone 0800 232 816.

Wallsawing

These cuts for window opening were achieved using a wallsaw.

Concrete cutting and drilling produces slurry.

Slurry contains calcium carbonate, is a base with a high ph level, is detrimental to marine flora and fauna, and so it is illegal to dump it into sewers, storm water systems, or natural waterways. As such it is important that controls are in place.

Sharp Concrete Cutters and Drillers Ltd provide a comprehensive slurry control service.

Through the use of our truck, can remove 2500 litres of slurry. The truck also holds 1000 litres of water and has a high-pressure water blasting unit.

Our truck is also regularly used in aggregate exposing and acid washing applications.

We also have a number of 600-litre tanks and are committed to leaving every job clean and tidy.

Call us, Sharp Concrete Cutters and Drillers Ltd today to discuss how we can help you achieve your project goals. Freephone 0800 232 816.

Have you got a project somewhere in Auckland that requires concrete cutting and drilling services?

We are an Auckland based company offering services nationwide – contact us today .

Do you want a preferred contractor to complete all your concrete cutting and drilling requirements?

We work for some of New Zealand’s biggest and most influential construction companies. See our testimonials page for a snapshot of what they have to say about us.

Does your project require concrete cutting and removal?

We provide a complete concrete cutting and removal service using cutting-edge equipment and only the best diamond blades.

Do you need holes drilled?

We provide a complete concrete drilling service. Any size, any depth – call us today to discuss your requirements.

Is your project inside?

Our equipment runs on a variety of power sources including single and three phase electricity, and hydraulic to minimise emissions.

Do you need slurry control?

Concrete Cutting and Drilling — Slurry Control Vacuum Truck

We provide a complete slurry control service. Our operators carry industrial wet vacuums and slurry tanks. We also have a dedicated slurry control vacuum truck, capable of removing 2500 litres of slurry. It also holds 1000 litres of water and has a high-pressure water blasting unit.

Are you a leading project manager or construction company?

We partner with some of New Zealand’s leading project managers and construction companies providing concrete cutting and drilling services nationwide. See our testimonials page for a snapshot of what they have to say about us.

Are you looking for a professional concrete cutting and drilling service committed to high standards of health and safety?

We partner with leading health and safety organisations, SiteSafe, Safety n Action, and HazardCo to ensure all work is carried with health and safety as the number one priority.

We are also members of the national concrete sawing and drilling associations.

stitch drilling

Client required a 600mm x 600mm opening 330mm deep.

To achieve this, stitch drilling was required.